Attention !!

This homepage and the databases are frozen and no longer maintained.

No more support via this homepage, support only by Alain Fontaine

 in the Tuneecu Chat in Facebook.

TuneECU can basically be used only on models which are listed in the compatibility list.
last update August-2018

Warning !!
Unfortunately we discovered that in the internet on some sites, illegal copies of our Android version be offered.
We can only warn against downloading these illegal copies

Download and install TuneECU for Android for your own safety, only from the Google Play Store.

Support is only for the software
(Android Version only), no advice or recommendation
will be given on the use of maps. 
Except the brief descriptions available on the site,
no additional information will be provided on the maps, for any additional questions,  please ask in the appropriate forums.


TuneECU for Windows,  is freeware and may only be distributed free of charge.

The Android version of TuneECU is chargeable and is available on Google Play Store.

Note: use the search term "tuneecu" in Store.

This description was created for the Windows version of TuneECU and can be applied largely
on the Android version. Deviations in the Android version will be added here by and by.

For some time, some online auction platforms offer complete sets with cable, TuneECU Software,
instructions and maps. These providers do not act on our behalf.
The team TuneECU dissociates from these suppliers, as we have no control over what is passed
from these providers on the users. For safety ! -  
Download the Windows software, instructions and
maps exclusively from our 
Download the Android software exclusively from the Google Play Store.

  1. If this software is not correctly applied, the engine can be destroyed.
  2. TuneECU is not a "Gameboy", anyone who uses this tool on his motorcycle should know very well,
    what he is doing and he does it at your own risk.
  3. At use of this software, under certain circumstance can invalidate your warranty.
  4. In the database provided custom maps can be used only as a basis for a tuning
    on a suitable dynamometer. 
  5. Because every engine is different, least should be performed a test run with A/F curve,
    If you want to have joy on your engine for a long time.

TuneECU is a software for  reprogramming, diagnosis and testing of the Engine Control Unit (ECU)
fitted to Electronic Fuel Injected (EFI) modells from Triumph, KTM, Aprilia Benelli, Ducati, Moto Guzzi,
Gilera, BMW, CCM, Husqvarna & Moto Morini.
This software is compatible with the following models:

TuneECU can only be used on the following models.
Date of information
Triumph Daytona 675, only up to VIN # 564947
August       2014
Triumph Daytona 675, from VIN # 564948 | only via *Bluetooth with TuneECU for Android. August       2014
Triumph Street Triple & Street Triple R, only up to VIN # 560476
August       2014
Triumph Street Triple & Street Triple R, from VIN # 560477 | only via *Bluetooth with TuneECU for Android. August       2014
Triumph Speed Triple 885, 955, 1050 & 1050 R (including models 2014) August       2014
Triumph Tiger  800/800XC, 885 (900), 955, 1050 & Tiger Sport (including models 2014)
All Tiger 800 models from 2015 and upwards, only with TuneECU for Android and exclusively via Bluetooth.
Triumph Tiger Sport 2016 (from VIN750470) only via Bluetooth and TuneECU for Android.
June           2018
Tiger Explorer only via *Bluetooth with TuneECU for Android. August       2014
Triumph 955 Sprint ST/RS and 1050 Sprint ST/GT (including models 2013) August       2014
Triumph Daytona T595/955i (all model years) August       2014
Triumph Rocket III  (all model years)   August      2018
Triumph Daytona 600, 650, Speed Four and TT600 (all model years)  August       2014
Triumph Thunderbird (1600 & 1700 cc) , Thunderbird Storm,  including models 2015,
except Commander and LT.
America,  Speedmaster,  (including models 2014) 
Bonneville, Scrambler, Thruxton  (including models 2015)
August      2015
KTM 990 LC8 & 1190 RC8 (including models 2012)
KTM 690 Duke (including models 2011) (except all Duke 4 models
KTM 690 SMC & Enduro/690 Supermoto (including models 2013)
KTM 1190/1290 models only for diagnostics and via *Bluetooth with TuneECU for Android.
Jun              2018
Aprilia models Caponord, Futura RST, RSV850, RSV4, TUONO V4, Dorsoduro750 & Shiver750*
The models RSV850, RSV4, TUONO V4, Dorsoduro 750 & Shiver 750 are only supported by TuneECU for Android
July             2018
Benelli Tornado, Benelli TNT & TREK models August       2014
Ducati # 749, 848, 999, 1098, 1198, SS 1000 DS
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
July             2017
Ducati StreetFighter 848 & 1098 
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March        2015
Ducati # Monster 620, 695, S2R 800/1000 & S4R
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March        2015
Ducati # Hypermotard 1100 (not EVO)
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March        2015
Ducati # Multistrada 1000 & 1100
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March        2015
Ducati # ST3 & ST4
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
May            2015
Ducati # Sport Classic 
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
May            2015
Moto Guzzi Breva 1100, Moto Guzzi Griso 1100/1200, Moto Guzzi Norge 1200,
Moto Guzzi Stelvio 1200, Moto Guzzi 1200 Sport, Moto Guzzi Bellagio
# ECU 5AMHW610 Moto Guzzi models are only supported by TuneECU for Android
July             2017
Moto Morini Corsaro 1200, Moto Morini Avio, Moto Morini Granpasso 1200
Moto Morini 1200 Sport, Moto Morini 9 1/2
# ECU 5AMHW610 Moto Morini models are only supported by TuneECU for Android
Jun             2015
Gilera GP800
Gilera models are only supported by TuneECU for Android
March        2016
Husqvarna 449/511
Husqvarna models are only supported by TuneECU for Android
August       2016
BMW  models are only supported by TuneECU for Android
September 2016
CCM 450
CCM models are only supported by TuneECU for Android
October     2016
* With Bluetooth connection, reading and reprograming map functions are not available.

Technical Support only for the Android version of TuneECU.Please visit the TuneECU- Chat .

To get support, the following information are required:

A short description of the problem.
- Android device
- Android version
- TuneECU version (Lite or full version)
- What connection is used, Bluetooth or cable
- For Bluetooth problems: What a Bluetooth adapter is used? (Manufacturers and
  Software version)
- Charged Map
- Vehicle Type
For the Android version, in TuneECU directory a trace.txt is generated, this trace file basically
send you along with the inquiry as ZIP- or RAR-file.

Without the above mentioned information, no support can be done.

System requirements Windows System: 
  • Computer:  PC or Netbook , running  Windows (XP, Vista,  Windows 7, Windows 8 & 8.1, Windows 10
    (32 or 64 bit)
    (except Windows  RT & Windows Phone)
  •  USB 2.0 or better.
  • 1024x576 display and NET Framework (XP only) Vers. 2.0 and upwards..
  • Cable for connecting to the dedicated 16-pin diagnostic plug of the Engine Control Module.
    For ECM Sagem and Keihin models:
    USB/OBDII cable with FTDI chip set and associated CDM (D2XX) ver. 2.06.00 drivers or higher.
    Note: for Windows 8 & Windows 8.1 from driver vers. 2.08.28, select here the driver package
    for manual  installation.
    From driver version 2_08_30, works with WIN 8 & 8.1, the automatic installation via
    Windows driver update.
    For ECM Walbro:
    Only a serial cable RS232, a serial port on the computer, and AMP-Super-Seal-connector-6pin
    is required see here.
    Maybe You need nor a USB/RS232-converter. This converter is required, if your
    computer has
    no a serial interface (RS232).

    Note: For the Walbro models is when using TuneECU for Android, still a special converter cable, FTDI-USB-RS232, required. see here.
System requirements Android System:
  • Smartphone or Tablet Android version 4.0 minimum, dual Core 1.2 Ghz mini.
  • Cable USB OBD2 FTDI (The cable is the same as the windows version)
  • Adapter USB/micro (cable OTG) if needed.
  • Optional: Interface Bluetooth ELM327,  version 1.4 or 1.5
  • More info here

Drivers limitation for the USB-Tuneboy-cable (Windows System):     

The TuneBoy cable works only with the ancient FTDI driver from TuneBoy's own site.
For  WIN8 / 8.1 & 10 unfortunately, the tuneboy driver is to install only with a trick.
For WIN8 / 8.1. See here.

With Win 10 is similar
The problem is the enforced driver signing in Windows8, Windows 8.1 & Windows 10.
The hardware id of TuneBoy cable is different vs. a generic/TuneECU FTDI cable.
So even though both cables have same chip, TuneBoy cable needs the matching driver.
Restrictions on the use of the serial TuneBoy-cable (Windows & Android System):

The serial TuneBoy-cable can also be used with TuneECU, but is a USB-Serial-Adapter necessary,
which has a FTDI-chip-set. Good example is here the Digitus DA-70156 USB-Serial-Adapter.

Recommendation for USB/OBD2 cable:  Triumph-TwinPower

More sources
for USB/OBD2-Cable and Adapter, can be found

TuneECU (Windows Version) on a MAC computer ?
You will need a way to run Windows (preferably XP) on your Mac. This can only be done on those
running an Intel Processor (so if you've got a (very) old one, you're out of luck).

There are different ways to do this:
  • Dual boot (Bootcamp)
  • Virtualbox
  • VMware Fusion
  • Parallels
Once you've got Windows running you are all set. Just download TuneECU, and make sure your
cable driver is installed correctly in Windows.
!!!!!!!!!!! IMPORTANT NOTICE - PLEASE  READ FIRST !!!!!!!!!!!

1. Read the "Map Edit section" of the User Manual carefully and familiarise yourself thoroughly
    with the program before you begin!

2. Resist the temptation to fiddle before you know what you are doing!

3. Ensure you have the correct tune for the VIN range of your bike and its specification!

4. If you are not an expert in tuning EFI systems, keep to the Triumph OEM tunes or recommended
and resist the temptation to modify them!

5. If you are in doubt ask an expert. E.g. on the following partner forums:

English: Triumph or or
German: Triumph or
French: Triumph
Italian: Triumph
Spanish: Triumph Foro   Forum no longer exists.
Portuguese: Triumph

6. Do not download tune maps to/from the ECM without first ensuring your motorcycle battery is
 charged, your lights are disabled by removing the appropriate fuse, the 16-pin cable is
    connected to both
 your PC/Laptop and the 16-pin diagnostic plug of the Engine Control Module
    (ECM) and the ignition is on!
Occasionally it happens that the download is interrupted, although we have kept strictly to the
    It turns out that it comes to these interruptions, when the battery voltage falls below 12,5 volts,
    even when connected a battery charger. Apparently the power of modern chargers is not sufficient
    to avoid a voltage drop.

    It works perfectly when a second 12-volt car battery is connected.

7. Basically: make sure the TuneECU or the Tunes are not stored in too deep directory (this may lead
    to the firing of the ECU!) or the map is not even loaded.

    Negative Example: c: / tune / ecu / my / triumph / ecu / maps / to / I / myself have created /Tuneecu.exe or
Please store the map for example in:  C: \ Tune or D: \ Tune
Please store the program and the "TuneLibrary.dll" in:  C: \ Program Files \ TuneECU
This ensures that everything works.

Use of the software is at your own risk. Neither the software developer or the website operator will provide any form of guarantee. 

!!!!!!!!!!!!!!!!   Damages of any kind will always be to the detriment of the end user.  !!!!!!!!!!!!!!!!!!!

Software for Windows, drivers, maps and tools, find here.

TuneECU for Android is available on Google Play Store.

All care has been taken in the creation of this page, however, the author
cannot guarantee  the completeness and accuracy of this information.

*** END ***